top of page

Swing Frame grinder parts list

Operating & Maintenance Instructions 

pdf-icon-png-16x16-pictures-26.png
4618789619_715x550.png
4618789620_428x247.png

LUBRICATION:

One alemite fitting on the swivel housing, item 5, requires periodic lubrication with a good grade of grease as use dictates.

BELT TENSIONING:

Pressure required for tensioning the abrasive belt is determined by the width and grade of the belt. Set the pressure just high enough to drive and track the belt-maximum on heavy coarse belts.

 

ADJUSTMENTS: 

Tracking of the abrasive belt is accomplished by turning the tracking knob, item 19, to the right or left, Swivel lock, item 18, controls the swivel adjustment; to tip the contact wheel radially to the left or right. This can be locked at any point.

CHANGING CONTACT WHEEL:

Remove the screws holding the outer flange, remove the flange, then the old tire and install the new tire. Be sure the rim of the new tire is on the pilot or shoulder of inside hub before replacing outer flange.

4618789617_363x321.png
4618789618_354x324.png

WARNING:

BE SURE THE MACHINE IS PROPERLY SUPPORTED FROM AN OVERHEAD HOIST WITH A CAPACITY OF AT LEAST 2 TONS, IF BEING USED AS A SWINGFRAME GRINDER. BE SURE IT IS PROPERLY SUPPORTED REGARDLESS OF THE APPLICATION. FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY.

 

WARNING:

BE SURE THE POWER SUPPLY IS LOCKED-OUT PRIOR TO INSTALLING THE MACHINE. FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY OR DEATH.

 

WARNING:

ALWAYS WEAR EYE PROTECTION AND SAFETY SHOES WHEN OPERATING THIS GRINDER. AVOID LOOSE CLOTHING, FAILURE TO HEED THIS WARNING COULD RESULT IN SERIOUS INJURY.

WARNING:

BE SURE POWER SUPPLY IS LOCKED-OUT PRIOR TO PERFORMING ANY SERVICE OR MAINTENANCE OPERATIONS. FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY OR DEATH. WARNING: BE SURE ALL GUARDS ARE IN PLACE BEFORE OPERATING THIS MACHINE. THE BELT IS ENCLOSED EXCEPT FOR THE GRINDING AREA. BEWARE OF THIS AREA. FAILURE TO HEED THIS WARNING COULD RESULT IN SERIOUS INJURY.

 

WARNING:

BE SURE POWER SUPPLY IS LOCKED-OUT PRIOR TO CHANGING THE ABRASIVE BELT AND THAT THE BELT AND PULLEYS ARE NOT MOVING.BE SURE BELT GUARD DOOR IS CLOSED AND LATCHED BEFORE STARTING AND RUNNING. FAILURE TO HEED THIS WARNING COULD RESULT IN SERIOUS INJURY.

bottom of page